- Our Digital Picture Frame Plus -
- Building the frame -

After determining that I will be needing about 6cm depth,
I went to Home Depot to pick up a poplar board and trimming.

45° cuts glued together with a strong gorilla...
Steel brackets were also glued in for more support.

Glued small wood blocks to support the LCD screen.

Removed the excees glue with a chisel.

After drying, I checked if the screen REALLY fits...

Drilled holes and used screws to properly install the metal brackets.
This thing is meant to be hanged, so this was an important step.

The rim was made the same way, except no brackets.

Strong pressure was applied for a day to guarantee a good
hold. I cut a styrofoam mold to support it while drying.

Go to the next step.

Go back to the Digital Picture Frame Project page.